SMOK TFV8 Big Baby RBA + Spare Replacement Glass

Genuine SMOK TFV8 Big Baby RBA with spare replacement glass for Big Baby RBA

Please note, this RBA does not work in the TFV8 Baby 2ml or 3ml tank.

Also, the glass used with this RBA is taller than the regular Big Baby tank glass. We sell additional replacements for this here
The glass supplied with this kit is the 3ml TFV8 baby glass, although we're not sure why as the RBA is too big for the baby tank..

1. Before starting make sure your hands are clean.

2. Taking RBA deck apart.
3. Place the coil between the posts and wrap the ends around the screws and tighten up. Once all is in place, make sure the coil is fixed in the centre and lined up with the air hole and also the coil is NOT touching the base. Trim the ends of the wire off.
4. Cut a strip of cotton and insert through the coil, placing it in the middle.
5. Cut the cotton at an angle and make sure it’s not too short and not too long.
6. Wet the coil with your e-liquid and adjust the cotton, poking the tails down underneath as shown

Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.

Customer Reviews

Based on 1 review Write a review
$(document).ready(function() { $('.main_box').matchHeight(); });