Joyetech Cuboid 200W TC Box Mod

£35.00

Cuboid Cuboids Variable Temperature Control system complete with firmware V3.0 and 150W output and Temp-SS316 and customised TCR. It is powered by two replaceable 18650 cells with a new slip-open cover.
Multiple colours, 0.96-inch OLED screen and the new dual-battery bar display make it more practical and attractive. Upgradeable firmware enables it to always stay up-to-date. Now you can upgrade your Cuboid to 200W via VT Software.Cuboid

Standard Configuration:
1 x Cuboid (no cell)
1 x USB Cable
1 x Manual
1 x Warranty Card Product Parameters:

Cuboid

Cuboid

150W Output and Dual Battery Bar Cuboid uses two replaceable batteries with the new dual battery bar.
The maximum output can be reached to 150W, making it powerful and convenient.
We kindly recommend high-rate 18650 cells with rated discharge current≥25A.

Cuboid

New Slip-open Cover and Battery Reverse Polarity Protection The new slip-open cover on the bottom enables you change your battery swiftly by pulling the slider over.
With the Onboard Reverse Polarity Protection, it will protect the device from damage in the event of reverse battery installation. Cuboid

Please pay attention to the positive and negative terminal signs when installing new batteries. Firmware Upgradeable Cuboid comes with the upgradeable firmware.
Having Version 3.00 for Cuboid, Temp-SS316 and TCR are available now.

Cuboid

New Firmware V3.10 for Cuboid Cuboid can be upgraded via VT Software.
The new firmware V3.10 for Cuboid, making the maximum output up to 200W.

Cuboid

Temp-SS316 ModeBased on the previous Temp-SS mode, we developed the new Temp-SS316 mode.
We kindly recommend using Joyetech BF-SS316 atomiser heads (0.5ohm/1.0ohm).

Cuboid

Customised TCR Available
Cuboid enables you to adjust TCR values for different materials, thus further improving the accuracy of temperature control and bringing you greater taste. There are three options (M1, M2, M3) for you to customise the TCR regarding to the material.

In power-off condition, press the fire button and the right regulator simultaneously for around 5 seconds, then you enter into the TCR set menu:
And here's the TCR Value Range for your reference:

Cuboid

Exquisite 510 Stainless Steel Thread
Applied with 510 stainless steel thread and wide border fitting for large capacity atomisers.

Cuboid

Charging & Upgrading We kindly suggest you take out the cells and charge them with a separate charger.

The micro USB port is on the top of the left side. Connect it with a micro USB cable to charge or upgrade your device.

Cuboid

Customer Reviews

Based on 2 reviews Write a review
$(document).ready(function() { $('.main_box').matchHeight(); });